To Next PageTo Next PageWhy does my Scheppach SG2500i Portable Generator engine not start?
If your Scheppach Portable Generator's engine won't start, it might be due to a dirty spark plug. Try cleaning the spark plug, or replace it if necessary. Also, check the fuel level and refill if it's empty.
Why Scheppach Inverter engine does not start?
If your Scheppach Inverter engine isn't starting, it could be due to a dirty spark plug or lack of fuel. Try cleaning or replacing the spark plug, ensuring the electrode spacing is 0.6 mm. Also, make sure to refill the fuel tank.
What to do if my Scheppach Portable Generator has no voltage?
If your Scheppach Portable Generator has too little or no voltage, the air filter might be dirty. Clean or replace the filter. In case the controller or capacitor is defective, contact your dealer.
What to do if my Scheppach SG2500i Portable Generator engine cannot be started?
If your Scheppach Portable Generator's engine won't start, there are several potential causes. First, the automatic oil cut-off may be activated; check the oil level and add engine oil if needed. Another possibility is a sooty spark plug, which should be cleaned or replaced. Finally, ensure that the generator has enough fuel by topping it up.
General| Rated Power | 2000 W |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Running Time at 75% Load | 4.5 h |
| Fuel Type | Petrol |
| Starting System | Recoil starter |
Explains hazard symbols like DANGER, WARNING, CAUTION, and general notices.
Lists specific safety instructions for safe operation and handling (points 1-18).
Outlines precautions for electrical connections and protection against shocks.
Details safety guidelines for handling and using petrol fuel.
Checks and connections for electrical safety before operation.
Instructions for earthing the generator for static discharge.
Procedure for checking and filling engine oil before operation.
Instructions for filling the fuel tank with Super E10 petrol.
Step-by-step guide for starting the engine (cold and warm).
Procedure for safely stopping the engine after use.
Explanation of the indicator lights and displays during operation.
How the overload protection works and what to do.
Function of the oil level warning light.
Explanation of the automatic engine shutdown due to low oil.
How to use the energy saving feature for fuel efficiency.
Information on the USB ports for charging devices.
Instructions for keeping the device clean after use.
General safety precautions for maintenance work.
Procedure for checking the engine oil level.
Steps for changing the engine oil at specified intervals.
Instructions for cleaning and replacing the air filter.
Guide to checking, cleaning, and replacing the spark plug.
Steps to clean the fuel filter insert.
Steps for preparing the generator for long-term storage.
Procedure to safely drain fuel for storage.
