www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
28
|
GB
6. Technical data
Type engine four stroke engine/air cooled
Cubic capacity 224cm³
Rotation speed 2800 min
-1
Max. engine output 5,15 kW / 7.0 HP
Fuel
Standard unleaded petrol
with max. 10% bioethanol
Capacity tank 1.2 l
Motor oil SAE 30 / 10W40 / 10W30
Capacity tank/oil 0.5 l
Cutting height
adjustment
25-75 mm / 7 - stages
Collection bag
capacity
65 l
Cutting width 53 cm
Weight 35,8 kg
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L
pA
= 84.1 dB(A)
Uncertainty K
PA
= 3 dB(A)
Sound power L
WA
= 95.7 dB(A)
Uncertainty K
PA
= 1.91 dB(A)
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration A
hv
(left/right) = 7.38 m/s
2
Uncertainty K
PA
= 1.5 m/s
2
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
When using the petrol lawn mower for extended peri-
ods, vibration-induced circulatory problems may oc-
cur (white nger disease).
We cannot give exact details about the duration of
use in this case because it is different for each indi-
vidual.
The following factors can inuence the condition:
• Circulatory problems in the user’s hands
• Low outside temperatures
• Extended periods of use
We therefore recommend you wear warm work gloves
and take regular breaks.
• Operation of the machine at higher than normal
speed can lead to an increased risk of accidents.
• Take care when carrying out installation work on
the machine, and avoid trapping ngers between
the moving cutting tool and the xed parts of the
machine.
• Please be particularly careful when mowing on
ground that may subside, on nearby landlls,
trenches and embankments.
• The user must be adequately trained in the use,
adjustment and operation of the machine (including
prohibited operations).
• Check the machine regularly and ensure that all
start locks and push buttons are working properly
before each use.
• Please note that improper maintenance, the use of
inappropriate spare parts, or the removal or modica-
tion of safety devices can result in damage to the ma-
chine and serious injury to the person working with it.
• Please note that the lawnmower‘s safety systems
or devices must not be manipulated or deactivated.
• Please note that the user must not change or ma-
nipulate any sealed engine speed control settings.
• Only use cutting equipment and accessories rec-
ommended by the manufacturer. The use of other
tools and accessories may result in injury to the
operator.
• Always keep the lawnmower in good operating con-
dition.
• It is necessary to take enough breaks to reduce
noise and vibration exposure.
• Attention! The lawnmower must not be operated
without the use of either the full grass catcher or
the self-closing guard for the discharge opening.
Residual risks and accident prevention stand-
ards
Neglect of ergonomic principles
Negligent handling of personal protective equip-
ment (PPE)
Negligent handling or ommission of the personal pro-
tective equipment may cause serious injuries.
- Wear prescribed personal protection equipment.
Human behaviour, misbehaviour
- For any work be fully concentrated.
m Residual risks - Cannot be entirely excluded.
Danger from noise
Hearing damage
Prelonged unprotected work with the device may
cause hearing damage.
- Always wear ear-muffs.
In case of emergency
In case of a possibly occurring accident take the nec-
essary rst aid steps as appropriate and obtain qual-
ied medical aid as quickly as possible.