www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
53
The equipment is to be operated only with suitable saw blades. It is pro-
hibited to use any type of cutting-o wheel.
To use the equipment properly you must also observe the safety infor-
mation, the assembly instructions and the operating instructions to be
found in this manual.
All persons who use and service the equipment have to be acquainted
with this manual and must be informed about the equipment’s potential
hazards. It is also imperative to observe the accident prevention regu-
lations in force in your area. The same applies for the general rules of
health and safety at work.
The manufacturer will not be liable for any changes made to the equip-
ment nor for any damage resulting from such changes. Even when the
equipment is used as prescribed it is still impossible to eliminate certain
residual risk factors. The following hazards may arise in connection with
the machine’s construction and design:
• Contact with the saw blade in the uncovered saw zone.
• Reaching into the running saw blade (cut injuries).
• Kick-back of workpieces and parts of workpieces.
• Saw blade fracturing.
• Catapulting of faulty carbide tips from the saw blade.
• Damage to hearing if ear-mus are not used as necessary.
• Harmful emissions of wood dust when used in closed rooms.
Please note that our equipment has not been designed for use in com-
mercial, trade or industrial applications. Our warranty will be voided if
the equipment is used in commercial, trade or industrial businesses or
for equivalent purposes.
5. Safety information
General power tool safety warnings
m WARNING! Read all safety warnings, instructions, illustrations
and specications provided with this power tool.
To Next Page
Loading...
Need help?
General