29
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
29GB
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
14. Troubleshooting guide
Fault Possible causes Rectication
Motor does not start
a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block defective
d) Connections to motor or capacitor
disconnected
e) Blade roller blocked
a) Check line and fuse
b) Have machine checked by a customer ser-
vice center
c) Have machine checked by a customer ser-
vice center
d) Have machine checked by a customer ser-
vice center
e) If necessary adjust working depth. Clean
housing so that the roller can run freely
Engine performance
drops
a) Soil is too rm
b)Carbonbrushes worn out
c) Roller badly worn
a) Change working depth
b) Check by a customer service center
c) Replace roller
The Electric Tiller is dif-
cult to check.
a) roller worn
b) Wrong working depth
a) Replace roller
b) Correct working depth
Motor is running, roller is
not rotating
a) Gearing defective a) By customer service workshop
To Next Page
Loading...
Need help?
General
