To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if the wood gets burnt during sanding with Scheppach Sander?
If the wood is getting burnt during sanding with your Scheppach Sander, it could be due to a grease sanding disc or belt cover, so replace the disc or belt. Also, excessive pressure on the workpiece can cause burning, so reduce the pressure.
Why does my Scheppach OSM600 get slower during work?
If your Scheppach Sander machine gets slower during work, it is likely that too much pressure is being applied to the workpiece. Reduce the pressure to resolve this issue.
How to fix a Scheppach OSM600 when the sanding belt comes off?
If the sanding belt comes off the drive pulleys on your Scheppach Sander, it's likely that the belt isn't running straight. Reset the track to fix this.
What to do if Scheppach Sander motor doesn’t start?
If the motor of your Scheppach Sander doesn’t start, the ON/OFF switch might be damaged. Replace all damaged parts before using the machine again. If that's not the case, contact your local service center, as repairs should be done by skilled personnel.
Why does my Scheppach Grinder motor not start?
There are several reasons why the motor of your Scheppach Grinder might not be starting: the ON/OFF switch could be damaged (in this case, replace all damaged parts before you use your machine again), the ON/OFF cable could be damaged, the ON/OFF relay could be damaged, the fuse might be blown, or the motor could be burnt. If the motor is burnt, it is recommended to contact your local service center.
Why does my Scheppach Grinder get slower during work?
If your Scheppach Grinder gets slower during work, it's likely that too much pressure is being applied to the workpiece. Reduce the pressure to resolve this issue.
What to do if Scheppach Grinder has strong vibrations?
If your Scheppach Grinder is experiencing strong vibrations, it could be due to a loosely mounted tool (tighten the tool), a defective tool (change the tool), or a spindle knock (repair at a Service-Station).
Why does the wood get burnt during sanding with my Scheppach Grinder?
Burning wood during sanding with your Scheppach Grinder can occur if the sanding disc or belt is covered with grease (replace the disc or belt) or if excessive pressure is applied to the workpiece (reduce the pressure).
Why won't my Scheppach Grinder motor start?
If the Scheppach Grinder motor doesn't start, it could be due to a damaged ON/OFF switch, a blown fuse, or a burnt motor. If the ON/OFF switch is damaged, replace all damaged parts before using the machine again. If the motor is burnt, contact your local service center for repair.
How to prevent wood from burning when sanding with Scheppach Grinder?
Wood burning during sanding with the Scheppach Grinder can happen if the sanding disc or belt is covered with grease, or if you're applying excessive pressure. Replace the disc or belt if it's covered in grease. Reduce the pressure on the workpiece to avoid burning.
Information about the manufacturer, company, and advice on using the manual.
Covers work area, electrical, and personal safety for electric tools.
Guidelines for using and handling the electric tool safely and proper maintenance.
Safety advice specific to table-top grinders and oscillating sanders.
Instructions for changing tools on the machine, including safety precautions.
Detailed steps for installing and changing abrasive belts and adjusting tension.
Instructions for attaching and securing the workpiece stop for stable operations.
Guidance on securing the sander to a workbench for stable and safe use.
Instructions for operating the power switch and performing sanding tasks.
Techniques for bevel sanding and surface sanding on the belt.
Details of the warranty coverage and conditions for the product in English.
General
