www.scheppach.com
GB
|
33
13. Troubleshooting
Fault Possible cause Remedy
Motor does not start
Engine brake lever not pressed Press engine brake lever
Spark plug is defective Replace spark plug
Fuel tank empty
Fuel valve closed Fuel valve open
Motor power diminishes
Ground too hard Correct scarifying depth
Clean housing
Blade heavily worn Replace blade
Improper scarifying
Blade is worn Replace blade
Incorrect scarifying depth Correct scarifying depth
Motor runs, cutting roller
does not rotate
Toothed belt torn Have checked by customer service workshop
To Next Page
Loading...
Need help?
General
