EasyManua.ls Logo

Scheppach SG1200 - Troubleshooting Guide

Scheppach SG1200
36 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13.Troubleshooting guide
Fault Cause Remedy
Engine does not start Automatic oil cut-out has not responded Check oil level, top up engine oil
Spark plug fouled Clean or replace spark plug (electrode
spacing 0.6 mm)
No fuel Refuel / habe the petrol cock checked
Generator has too little or no
voltage
electronic defective Contact your dealer
Overcurrent circuit-breaker has triggered Actuate the circuitbreaker and reduce
the consumers
Air lter dirty Clean or replace the lter
19/36

Related product manuals