Need help?Do you have a question about the Schlage CM993 Series and is the answer not in the manual?
Table listing mortise cylinder lengths and corresponding blocking ring part numbers for installation.
Procedure for testing CM993 series lock functionality after installation.
Procedure for testing CL993 series lock functionality after installation.
Table listing mortise cylinder lengths and corresponding blocking ring part numbers for installation.
Procedure for testing CM993 series lock functionality after installation.
Procedure for testing CL993 series lock functionality after installation.
General| Series | CM993 |
|---|---|
| Type | Mortise |
| Grade | Grade 1 |
| Backset | 2-3/4 inches |
| Door Thickness | 1-3/4 in |
| Warranty | Limited lifetime |
| ANSI Grade | 1 |
To Next Page