L
Laurie AlvaradoJul 30, 2025
What to do if my Schlage lock doesn't work with the PIN or the beeper is silent?
- HhbaileyJul 30, 2025
If your Schlage lock isn't working when you enter the correct PIN or the beeper is silent, there might be a few reasons. First, the beeper could be off, so use manual programming to turn it back on. Next, make sure the battery or wired power is properly connected and that the batteries are put in correctly. If the batteries are old, try replacing them. Also, if your lock has an IPB through-door ribbon cable, check that it's connected right, with the red wire on the left and not squeezed in the door, and that none of the pins are bent.