Need help?Do you have a question about the Schlage CO-100 and is the answer not in the manual?
General| Access Control | Keypad |
|---|---|
| Power Source | Battery |
| Usage | Commercial |
| Product Type | Electronic Lock |
| Audit Trail | No |
| Wireless | No |
| Key Override | Yes |
| Brand | Schlage |
| Model | CO-100 |
| Type | Cylindrical Lock |
| Keyway | Schlage C |
| Backset | 2-3/4" |
| ANSI Grade | Grade 1 |
| Warranty | 3-year limited |
| Finish Options | Bright Chrome, Bright Brass |
Default PIN (13579/#) for installation/testing; automatically deleted upon new credential creation.
Defines Programming, Normal Use, Toggle, Freeze, Pass-Through with functions and default PINs.
Explains symbols: Programming Code, PIN, Asterisk, number keys, and Schlage button.
Details sequences for changing programming code, adding/deleting PINs, and setting relock time.
Instructions for managing lock beeper and adjusting user PIN length.
Lists error codes by green blink count, with corresponding error explanations.
Procedures to test lock function, lever operation, key entry, and default PIN access.
How to enter a valid PIN for access and restart after incorrect entry.
Steps to enter report mode and interpret LED indicators for battery status.
Procedures to retrieve firmware version, hardware status, and PCB serial number.
Step-by-step guide to reset the lock to factory settings, including prerequisites and confirmation.
Instructions for safely installing/replacing AA batteries, including orientation and wire handling cautions.
Details LED indicators for low battery/failure and corresponding solutions/battery failure mode.
Explains LED blink patterns for the Schlage button and Optional Inside Push Button (IPB).
Addresses lock function/beeper issues, providing possible causes and solutions.
States compliance with FCC Part 15 rules and the two conditions for operation.
To Next Page
