Schlage F-Series User Manual

1
Check door preparation.
Either style is ne. If you have questions about
door prep, see alle.co/std-door-prep.
No change
needed.
Change to
the circular
faceplate.
2
Install the latch.
If the latch does not t, you will need to adjust
your door prep. See alle.co/std-door-prep.
Latch
bevel must
face door
frame
F Series
Knobs and Levers
Quick Start Guide
Hall and closet
Bed and bath
Keyed entry
This guide shows keyed
entry installation. Go
online for more specic
interactive instructions,
videos, faqs, warranty and
more!
alle.co/fseries
Questions about your new lock?
Please don’t return it to the store!
Let us help you rst!
(888) 805-9837
*47642581*
47642581
© Allegion 2022
Printed in U.S.A.
47642581 Rev. 03/23-b
Lever position
Recommended lever position is shown in solid line
drawing. See alle.co/fseries for instructions.
Circular faceplate
Emergency unlock (Bed and bath)
To unlock from the outside, insert the pin and turn.
3
Install the strike into the door frame.
4
Install the exterior knob/lever.
Keyed entry
shown
5
Install the interior knob/lever.
While holding exterior knob/lever in place,
align hole with post and push against door.
Keyed entry
shown
6
Install the chassis screws.
Make sure the chassis is straight on the
door before tightening the screws.
Keyed entry
shown
UL
Install cup before step 2.
Open end
toward outside.
Inside
Outside

Schlage F-Series Specifications

General

Door Thickness	1-3/8" to 1-3/4"
Strike Plate Included	Yes
Material	Metal
Finish Options	Satin Nickel
Compatibility	Standard residential doors
Backset	2-3/8" or 2-3/4"
Keyway	Schlage C
Handing	Reversible
Warranty	Limited Lifetime

Summary

Schlage F Series Installation

Door Preparation Check

Verify door preparation is suitable for the lock, referencing online guide for details.

Latch Installation

Install the latch into the door, adjusting door prep if necessary.

Strike Plate Installation

Install the strike plate into the door frame for proper latch engagement.

Exterior Knob/Lever Installation

Install the exterior knob or lever onto the door assembly.

Interior Knob/Lever Installation

Install the interior knob or lever by aligning it with the exterior part.

Chassis Screw Installation

Secure the lock chassis by installing and tightening screws.

Emergency Unlock Feature

Instructions for unlocking Bed and Bath locks from the exterior.

Lever Position Guidance

Guidance on setting the correct lever position for installation.