Why Schlage Locks deadbolt does not extend after pushing and rotating thumbturn?
- RRaymond HebertSep 23, 2025
The reason the deadbolt does not extend after pushing and rotating the thumbturn is that the Lock and Leave feature is disabled.





Why Schlage Locks deadbolt does not extend after pushing and rotating thumbturn?
The reason the deadbolt does not extend after pushing and rotating the thumbturn is that the Lock and Leave feature is disabled.
Why doesn't my Schlage door lock unlock with the user code?
If your Schlage door lock isn't unlocking with the user code, the User Code entered is not a valid User Code.
Why is my Schlage FE595 Locks blinking red but no codes have been entered?
If your Schlage lock is blinking red and no codes have been entered, the battery is dead and must be replaced.
Why can't I delete all User Codes on my Schlage Locks?
If you cannot delete all User Codes from your Schlage lock, it is possible that the Programming Code was entered incorrectly the second time.
What to do if my Schlage FE595 is in Vacation Mode?
The reason the lock is not working as expected is that Vacation Mode is enabled. Disable Vacation Mode to restore normal operation.
What to do if I forgot my Schlage FE595 Locks programming code?
If you forgot your Schlage lock's Programming Code, check the front of the guide or the back of the keypad assembly for the default Programming Code.
How to fix Schlage Locks when you can unlock it without a code?
If you can unlock your Schlage deadbolt by simply pushing the button without entering a code, it means the lock was installed incorrectly and is not secure. To fix this, repeat the installation process, making sure the cam and bolt positions are correct, as outlined in the installation instructions.
Why is there a delay before my Schlage FE595 unlock after entering a valid code?
If there is a delay before your Schlage lock unlocks after entering a valid User Code, the battery is likely low and needs to be replaced.
Why can't I add a new User Code to my Schlage door lock?
If you cannot add a new User Code to your Schlage door lock, it may be because 19 User Codes already exist. Delete a User Code before adding a new one.
Why is there a delay before unlock after entering a valid User Code on my Schlage door lock?
If you're experiencing a delay before the Schlage door lock unlocks after entering a valid User Code, the battery is likely low and should be replaced.
Instructions for locking and unlocking the BE365 keypad deadbolt from the outside.
How to use the physical key to gain access when the battery is dead or codes are unknown.
Instructions for locking and unlocking FE575 (Auto Lock) and FE595 (Flex Lock) models.
How to use the physical key for access when the battery is dead or codes are unknown.
Details the Programming Code (six digits) and User Codes (four digits) for lock management.
Guides on adding/deleting User Codes and changing the Programming Code via keypad.
Instructions for Vacation Mode, Beeper settings, and deleting all user codes.
Deadbolt unlocks without code; indicates incorrect installation. Repeat installation steps.
Deadbolt does not extend after operation. Check Lock & Leave feature status.
Instructions for locking and unlocking the BE365 keypad deadbolt from the outside.
How to use the physical key to gain access when the battery is dead or codes are unknown.
Instructions for locking and unlocking FE575 (Auto Lock) and FE595 (Flex Lock) models.
How to use the physical key for access when the battery is dead or codes are unknown.
Details the Programming Code (six digits) and User Codes (four digits) for lock management.
Guides on adding/deleting User Codes and changing the Programming Code via keypad.
Instructions for Vacation Mode, Beeper settings, and deleting all user codes.
Deadbolt unlocks without code; indicates incorrect installation. Repeat installation steps.
Deadbolt does not extend after operation. Check Lock & Leave feature status.
| Brand | Schlage |
|---|---|
| Model | FE595 |
| Material | Metal |
| Style | Lever |
| Keypad | Yes |
| Number of User Codes | 19 |
| Compatibility | Standard doors |
| Backset | Adjustable 2-3/8" or 2-3/4" |
| Keyway | Schlage C |
| Handing | Reversible |
| Finish | Satin Nickel |
| Battery | 9V |
| Security | Grade 2 |
| Warranty | Limited Lifetime |
Loading...