To Next PageTo Next Page
Need help?Do you have a question about the Schlage GF3000 Gravity Force Series and is the answer not in the manual?
General| Model | GF3000 |
|---|---|
| Series | Gravity Force Series |
| Door Thickness | 1-3/4 inches |
| Latch Faceplate | Round Corner |
| Strike | Round Corner Full Lip |
| Material | Metal |
| Keyway | N/A (Passage, Privacy, Dummy) |
Details safety levels including warnings, cautions, and notices for potential hazards.
Lists required tools and product certifications.
Outlines electrical, mechanical, and dimensional details of the lock.
Instructions for accurately marking door and frame centerlines for proper lock alignment.
Steps for preparing Standard and TRD frame types for lock installation.
Steps for preparing TJ and SM frame types for lock installation.
Detailed steps for creating a pocket and trench for the threshold box in BRD models.
Instructions for preparing Standard, TRD, and BRD doors for lock installation.
Specific instructions for TJ and SM door types, including a critical warning.
Step-by-step guide for installing the lock components for mortise and BRD models.
Steps for installing the lock on TJ and SM surface mount applications.
Configuration steps for setting the automatic relock time delay feature.
Visual guides for electrical connections for various lock models.
Details on installing and configuring the Door Status Monitor for BRD models.
Procedures for adjusting the air gap between the magnet and armature for optimal performance.
Information on Door Status Monitor and Magnetic Bond Sensor outputs.
