Need help?Do you have a question about the Schmidt EAR Series and is the answer not in the manual?
Potential for serious injury; use only for intended purpose in faultless condition.
Configuration options for zero setting, timeout, and display backlight.
Switching between grams per square meter (g/m²) and grams (g) measuring modes.
Using the tare function to subtract container weight and reduce the measuring range.
Explains common error messages like Overload, Underload, and Zero setting not possible.
Selection of calibration weight values (50g to 300g) and calibration procedure initiation.
Procedure to set the instrument to zero after selecting the measuring mode.
Instructions for recalibrating the instrument using a calibration weight.
Procedure for powering on the balance, including initial zero setting and thermal stabilization.
Steps for placing the sample on the platform and ensuring correct readings.
To Next Page
General