User Manual - LLS 3
Page 4
1.0. Safety Warning ā English
1. Read, understand and follow all instructions in this manual.
2. Keep all safety and operating instructions for future reference.
3.
To ensure protection from electric shock, only power the LED Light
Source from an agency approved Class 2 DC power supply (double insulation)
such as the one included with the product.
4.
Never look directly at the LED output when on. LEDs feature a very high
luminance that can cause eye injury. Do not look at beam with optical
instruments. Use UV protective goggles when using a UV Light Source.
5.
Do not cover the front or the rear of the unit.
6. To ensure proper grounding, use the supplied ESD grounding connections.
7. Use only power cords with appropriate connectors for secure use.
8. Disconnect power cord when unit will be left unused for long periods of time.
9. Do not use this unit near any liquids or in an area with excessive moisture.
10. Do not place flammable materials on or near the unit.
11. Use only standard glass type cleaners. Do not use solvents or petroleum
distillates or any volatile or flammable liquids or foams.
12. Never spill liquid on the unit.
13. Unplug before servicing (servicing is for authorized personnel only).
14. Do not service the unit beyond that described in this manual. Return the light
source to an authorized service center. For a Return Material Authorization,
see Section 20.
To Next Page
Loading...
