SCHUBERTH M1 Pro - Anatomy the Helmet; Outer Shell; Inner Shell

12
3. ANATOMY OF THE HELMET
4. OUTER SHELL
The outer shell of the M1 PRO helmet combines an aerodynamically optimal
shape with consistent protection. It consists of a special glass-bre reinforced
duroplastic matrix developed by SCHUBERTH, which gives the helmet the high
level of strength needed for your protection.
Caution:
The safety helmet is designed to absorb the eects of only one impact.
The helmet must be replaced after a fall, accident or any other impact.
5. INNER SHELL
For optimised impact absorption properties, the inner shell of the helmet
consists of several components. The complex multi-segment foam padding of
the main body provides better absorption and dissipation of impact forces and
gives you the highest level of safety. The large side panels ensure the helmet
sits optimally and comfortably.
Face shield
Finger-Tab
Sun visor
Loudspeaker
Microphone
Chin strap with
ratchet strap
Ratchet lock
Ventilation regulator
Inner shell
Reectors
Face shield
mechanism
Outer shell
Inner lining
Retention system
(with anti-roll-o
system)
Slider for the sun
visor