SCHUBERTH M1 Pro - Retention System; Storing the Helmet

EN
31
1. Slide the ventilation hood towards
the backside of the helmet as far as
possible.
2. Squeeze both sides of
the ventilation hood.
2. While squeezing, slide the ventilation
hood backwards out of its attachment.
5. RETENTION SYSTEM
The metal components of the retention system do not require maintenance.
6. STORING THE HELMET
Store the helmet in the helmet bag supplied in a dry, well-ventilated and stable
place. Always position the helmet so that it cannot fall to the oor. Damage that
occurs in this way is not covered by the warranty.
Note:
Store the helmet out of the reach of children and animals.