SCHUBERTH M1 Pro - Ventilation Systems

24
3. Insert the headband padding and begin
clasping the buttons, starting from the
forehead.
Caution:
Never ride when parts of the inner lining have been removed.
Caution:
Excessive heat (e.g. exhaust heat) can cause damage to the inner lining!
Note:
To avoid damage to the inner lining and inner shell, do not hang the helmet
over the mirrors or handlebar grips.
13. VENTILATION SYSTEMS
HEAD VENTILATION
A large adjustable ventilation regulator is placed on the
top part of the helmet shell to allow for ventilation of
the head‘s surface. The inowing air is guided through
channels along the top of the head to provide an
eective supply of fresh air. The ventilation regulator
can be moved back and forth to vary the among of
air owing in and thus regulating the fresh air supply.
Moving the ventilation regulator to its end stop products
a maximum of inowing air.