SC10U
37
English
14.8 Enabling/Disabling Voice Activated Intercom
Voice Prompt
“VOX intercom”
Factory Default Disable
Enable/Disable Tap the (-) Button
If this feature is enabled, you can initiate an intercom conversation
with the last connected intercom friend by voice. When you want to
start intercom, say a word such as “Hello” loudly or blow air into the
microphone. If you start an intercom conversation by voice, the
intercom terminates automatically when you and your intercom friend
remain silent for 20 seconds. However, if you manually start an
intercom conversation by tapping the (-) Button within the intercom
menu, you have to terminate the intercom conversation manually.
However, if you start intercom by voice and end it manually by pressing
and holding the (-) Button for 3 seconds, you will not be able to start
intercom by voice temporarily. In this case, you have to tap the (-)
Button within the intercom menu to restart the intercom. This is to
prevent repeated unintentional intercom connections by strong wind
noise. After rebooting the SC10U, you can start intercom by voice
again.
14.9 Enabling/Disabling HD Intercom
Voice Prompt
“HD intercom”
Factory Default Enable
Enable/Disable Tap the (-) Button
HD Intercom enhances the two-way intercom audio from normal
quality to HD quality. HD Intercom will become temporarily disabled
when you enter into a multi-way intercom. If this feature is disabled,
the two-way intercom audio will change to normal quality.
Note:
The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
To Next Page
Loading...
