SCHUBERTH SC10U - Factory Reset and Universal Intercom Pairing

SC10U
39
English
14.14 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the (-) Button
To delete all Bluetooth pairing information of the SC10U, tap the (+)
Button until you hear a voice prompt, “Delete all pairings”, and tap
the (-) Button to conrm.
14.15 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default N/A
Execute Tap the (-) Button
To enter into Remote Control Pairing mode, tap the (+) Button until you
hear a voice prompt, “Remote control pairing”. Then tap the (-)
Button to enter into Remote Control Pairing mode. The headset will
automatically exit from the conguration menu.
14.16 Universal Intercom Pairing
Voice Prompt
“Universal intercom pairing”
Factory Default N/A
Execute Tap the (-) Button
To enter into Universal Intercom Pairing mode, tap the (+) Button until
you hear a voice prompt, “Universal intercom pairing”. Then tap the
(-) Button to enter into Universal Intercom Pairing mode. The headset
will automatically exit from the conguration menu.
14.17 Factory Reset
Voice Prompt
“Factory reset”
Factory Default N/A
Execute Tap the (-) Button
To restore factory default settings on the SC10U, tap the (+) Button
until you hear a voice prompt, “Factory reset”, and tap the (-) Button
to conrm. The SC10U powers off with a voice prompt, “Headset
reset, goodbye”.