SCHUBERTH SC10U - 15 Remote Control

SC10U
41
English
Tap (+) Button Tap (-) Button
Remote Control Pairing Execute
Universal Intercom Pairing Execute
Factory Reset Execute
Exit Conguration Execute
Voice Conguration Menu & Button Operations
15 REMOTE CONTROL
You can remotely control the SC10U via Bluetooth using the Remote
Control (sold separately). This eliminates the need to take off your
hand for button operations. Your SC10U and the Remote Control must
be paired together before use.
1. Turn on the SC10U and the Remote Control.
2. Press the (+) Button or the (-) Button for 10 seconds to enter the
conguration menu. Tap the (+) Button until you hear a voice
prompt saying,
“ Remote control pairing ” . Press the (-) Button to
enter into Remote Control Pairing mode and the red LED will ash
rapidly and you will hear multiple beeps. Please refer to
section
14.15 , “Remote Control Pairing” for more details.
3. Enter Bluetooth pairing mode on your Remote Control. The
SC10U will automatically perform pairing with the Remote Control
in pairing mode. You will hear a voice prompt,
“ Remote control
connected
” , when they are successfully connected.