OPERATION
FX-209 07/19 Operation Section 4-37
© 2019 Alamo Group Inc.
OPERATION
Large, dense, or wet vegetation may need to be
mowed in two or more passes to achieve a uniform
cut. In such conditions, raise the cutting height to
12” or more on the first pass
.
Then lower the mower to the desired height and
mow the vegetation a second time. If possible,
select a mowing pattern that is at a 90 degree angle
to the first pass to reduce streaking and provide a
more even cut
.
Stay alert and watch for trees, low hanging limbs,
power lines, and other overhead obstacles and
solid ground objects while you are operating. Use
care to avoid hitting these items.
To Next Page
Loading...