Schumacher BATTERY EXTENDER BE01248 User Manual (English)

Questions and Answers:

W
wrightsandraAug 6, 2025
What to do if my Schumacher BATTERY EXTENDER BE01248 won't turn on?
- J
  Joshua FloydAug 7, 2025
  If your Schumacher Battery Charger isn't turning on, there are several potential causes. First, the AC outlet might be dead; check the fuse or circuit breaker. Second, there might be a poor electrical connection; inspect the power cord and any extension cords for loose plugs. Lastly, the connections could be reversed; unplug the charger and reverse the clamps, noting that the charger won't detect reversed connections if the battery voltage is less than 2V.
J
Jeffrey WelchAug 12, 2025
What to do if the battery voltage drops in Maintain Mode on my Schumacher Battery Charger?
- R
  Robyn PerezAug 12, 2025
  If the battery voltage drops below 12.2V (for a 12V battery) or 6.1V (for a 6V battery) in Maintain Mode while using your Schumacher Battery Charger, the battery may be overheated. Allow the battery to cool. The battery may also be too large or have a short circuit. Have the battery checked or replaced to resolve this issue.
G
gilmorepatriciaAug 18, 2025
What to do if my Schumacher BATTERY EXTENDER BE01248 Battery Charger output current is too high in maintain mode?
- T
  Timothy ThomasAug 18, 2025
  If the Schumacher Battery Charger's output current is more than 2.0A for 12 hours in maintain mode, this indicates a lack of progress and the battery voltage is below 14.2V (for a 12V battery) or 7.1V (for a 6V battery). The battery may be defective, and you should have it checked or replaced.
S
Sarah JohnsonAug 25, 2025
What to do if my Schumacher BATTERY EXTENDER BE01248 doesn't fully charge the battery after 2 hours?
- G
  Gloria HickmanAug 25, 2025
  If, after 2 hours of charging with your Schumacher Battery Charger, the battery voltage is still below 10V (for a 12V battery) or 5V (for a 6V battery), desulfation may have been unsuccessful. Ensure there are no loads on the battery; if there are, remove them. If no loads are present, the battery may be defective and should be checked or replaced.
J
Jack GarciaAug 30, 2025
Why Schumacher BATTERY EXTENDER BE01248 shows low initial voltage and input?
- A
  Alicia WalkerAug 30, 2025
  If the Schumacher Battery Charger shows that the battery’s initial voltage is below 12.2V (for a 12V battery) or 6.1V (for a 6V battery) and the total input is less than 1.5 Ah, the battery capacity might be too low, or the battery may be too old. In such cases, have the battery checked or replaced.

Schumacher BATTERY EXTENDER BE01248 Specifications

General

Input Voltage	120VAC
Input Frequency	60 Hz
Output Current	1.5A
Battery Voltage	12V
Output Voltage	12V
Battery Type	Lead Acid
Battery Type Compatibility	AGM, Gel Cell
Charging Modes	Maintain

Summary

Important Safety Instructions

General Safety Guidelines

Essential safety rules for using the battery charger and avoiding hazards.

Explosive Gas Warning

Critical warning about explosive gases generated by lead-acid batteries.

Personal Safety Precautions

Personal Safety Measures

Guidelines for personal protection, first aid, and avoiding sparks near batteries.

Battery and Charger Compatibility

Specifies compatible battery types and charging limitations.

Preparing to Charge

Battery Preparation Steps

Procedures for removing battery, ensuring ventilation, and cleaning terminals.

Charging Preparation Details

Adding distilled water and setting correct voltage for charging.

Charger Location

Optimal Charger Placement

Recommended locations to avoid battery acid and ensure ventilation.

DC Connection Precautions

Safe DC Clip Connection

How to connect and disconnect DC output clips safely.

Following Steps When Battery is Installed in Vehicle

Connecting Battery in Vehicle

Step-by-step guide for connecting charger to battery within the vehicle.

Vehicle Grounding Considerations

How to determine and connect to the correct chassis ground.

Following Steps When Battery is Outside Vehicle

Connecting Battery Outside Vehicle

Step-by-step guide for connecting charger to battery outside the vehicle.

Marine Battery Charging Note

Specific instruction for charging marine batteries.

Grounding and AC Power Cord Connections

AC Power Cord Safety

Information on grounding, outlet requirements, and cord safety.

Using an Extension Cord

Guidelines for selecting and using extension cords with the charger.

Assembly Instructions

Charger Assembly Steps

Instructions for preparing the charger before use.

Features

Product Features Overview

Description of key components and features of the battery charger.

Control Panel

LED Indicator Guide

Explanation of the status lights on the control panel.

Operating Instructions

Charging Battery in Vehicle

Detailed steps for charging a battery while it is installed in the vehicle.

Charging Battery Outside Vehicle

Detailed steps for charging a battery when it is removed from the vehicle.

Using Quick-Connect Cable Connectors

Instructions for utilizing the quick-connect cable connectors.

Using Battery Clamps

Instructions for connecting and using the 50 Amp battery clamps.

Using Ring Connectors

Instructions for permanently attaching ring connectors to battery terminals.

Using 12V Accessory Plug

Instructions for connecting the charger to a 12V accessory outlet.

Battery Charging Times

Table showing estimated charging times for various battery applications.

Charging Modes

Automatic Charging Mode

Description of the automatic charge and switch to maintain mode.

Aborted Charge

Explanation of when charging aborts and the associated LED indicator.

Desulfation Mode

Process for treating sulfated batteries and potential outcomes.

Completion of Charge

Indication of charge completion and transition to maintain mode.

Maintain Mode (Float-Mode Monitoring)

How the charger maintains battery charge and potential issues.

Maintaining a Battery

Overview of maintaining 6V and 12V batteries for extended periods.

Maintenance and Care

Charger Care Guidelines

Recommendations for cleaning and maintaining the charger for longevity.

Storage Instructions

Proper methods for storing the charger and its cables.

Troubleshooting

Troubleshooting Spark Issues

Addresses why battery clamps may not spark when touched.

Troubleshooting LED Indicators

Explains LED behavior and possible causes for system status.

Troubleshooting Power Issues

Diagnoses problems with the charger not turning on.

Troubleshooting Voltage Settings

Addresses issues with selecting voltage or detecting battery status.

Troubleshooting Charging Problems

Diagnoses common charging failures and battery condition issues.

Before Returning for Repairs

Customer Service Contact

Information on how to contact customer service for assistance and repairs.

Specifications

Technical Specifications

Details on input voltage, output voltage, and current rating.

Replacement Parts

Available Replacement Parts

List of part numbers for common replacement accessories.

Limited Warranty

Warranty Coverage Details

Information on the two-year limited warranty, exclusions, and claims.

Warranty Limitations and Disclaimers

Details on warranty void conditions, liability limitations, and legal rights.

Related product manuals

BATTERY EXTENDER BE01251

19 pages

Schumacher Battery Charger