EasyManua.ls Logo

Schumacher BE01254 - User Manual

Schumacher BE01254
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CONTAINS SEALED, NON-SPILLABLE LEAD-ACID BATTERY. MUST BE DISPOSED OF PROPERLY.
WARNING: Possible explosion hazard. Contact with battery acid may cause severe burns and
blindness. Keep out of reach of children.
1. IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS.
WARNING: RISK OF EXPLOSIVE GASES.
WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE
EXPLOSIVE GASES DURING NORMAL OPERATION. IT IS IMPORTANT THAT YOU FOLLOW
THESE INSTRUCTIONS EACH TIME YOU USE THE UNIT.
To reduce the risk of battery explosion, follow these instructions and those published by the battery
manufacturer and the manufacturer of any equipment you intend to use in the vicinity of a battery.
Review cautionary markings on these products and on the engine.
WARNING! RISK OF ELECTRIC SHOCK OR FIRE.
1.1 Keep out of reach of children.
1.2 Do not disassemble the jump starter. Take it to a qualied service professional if service or repair is
required. Incorrect assembly may result in re or electrical shock.
1.3 Do not use the jump starter to jump a vehicle while charging the internal battery.
1.4 Do not recharge the jump starter with a damaged extension cord.
1.5 The jump starter gets hot during charging and must have proper ventilation.
1.6 Do not set the jump starter on ammable materials, such as carpeting, upholstery, paper, cardboard, etc.
1.7 Place the jump starter as far away from the battery being jumped as the cables will permit.
1.8 Do not expose the jump starter to rain or snow.
1.9 Never attempt to jump start a frozen battery.
1.10 Never place the jump starter directly above battery being jumped.
1.11 To prevent arcing, never allow the clamps to touch together or to contact the same piece of metal.
1.12 Use of an attachment not recommended or sold by the jump starter manufacturer may result in damage
to the unit or personal injury.
1.13 Never operate the jump starter if it is damaged.
For the manual with Spanish
visit www.batterychargers.com or call 1-800-621-5485.
Para obtener el manual en español,
visite www.batterychargers.com o llame al 1-800-621-5485.
Jump Starter and DC Power Source
OWNERS MANUAL
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the jump starter safely and effectively. Please
read and follow these instructions and precautions carefully.
0099002106-02
FOR MODELS
BE01254
FR01240
SJ1330
SJ1331
SJ1426
SPR1630

Questions and Answers

  • H
    hayneserikAug 18, 2025
    Why won't my Schumacher Remote Starter jump start my car?
    • J
      James OwenAug 18, 2025
      If your Schumacher Remote Starter won’t jump start your car, there are several potential reasons: * The connections might be reversed. If so, disconnect the unit and reverse the clamps. * The internal battery may not be charged. Press the Battery Status button on the front of the unit to check the charge level using the LEDs. * Your vehicle’s battery could be defective; have it checked by a professional. * The unit might not be turned on. Ensure the unit’s ON/OFF switch is in the ON position.
  • R
    Robert MartinezAug 20, 2025
    What to do if my Schumacher BE01254 won't power my 12V device?
    • K
      Kirsten WyattAug 20, 2025
      If your Schumacher Remote Starter isn’t powering your 12V device, consider these possibilities: * The internal battery might not be charged. Check its status by pressing the Battery Status button. * The 12V device itself may not be turned on; ensure it is. * The 12V device could be drawing more than 20A, have a short circuit, or the internal fuse may have blown. In this case, a qualified service person needs to replace the internal 20A fuse.
  • J
    jakemillerAug 23, 2025
    Why won’t the internal battery hold a charge in my Schumacher BE01254 Remote Starter?
    • T
      Tiffany RussellAug 23, 2025
      If the internal battery of your Schumacher Remote Starter won’t hold a charge, it might be defective and unable to accept a charge. Have the battery checked by a professional.
  • J
    John HudsonAug 26, 2025
    What to do if my Schumacher Remote Starter won’t jump start my car?
    • S
      Samantha LeeAug 26, 2025
      If your Schumacher Remote Starter isn’t jump-starting your car, there are several potential reasons. First, ensure the connections aren't reversed; if they are, disconnect the unit and reverse the clamps. Check the battery status by pressing the Battery Status button to ensure the internal battery is charged. Verify that the unit is turned on by setting the ON/OFF switch to the ON position. Finally, the vehicle's battery might be defective, in which case you should have it checked.
  • L
    Laura FowlerAug 28, 2025
    Why won’t the internal battery of my Schumacher BE01254 Remote Starter hold a charge?
    • S
      Stephen ThomasAug 28, 2025
      The battery may be bad and unable to accept a charge. Have the battery checked.
  • C
    casey44Aug 30, 2025
    What to do if my Schumacher Remote Starter won't jump start my car?
    • N
      nicholasclarkAug 30, 2025
      If your Schumacher Remote Starter won't jump start your car, several issues could be the cause: * The connections might be reversed. Disconnect the unit and reverse the clamps. * The internal battery may not be charged. Check the battery status by pressing the Battery Status button on the front of the unit. The LEDs will indicate the charge status. * The vehicle’s battery could be defective. Have the battery checked by a professional. * The unit might not be turned on. Ensure the unit’s ON/OFF switch is in the ON position.
  • A
    April Oneal DDSSep 2, 2025
    Why won't the internal battery hold a charge in my Schumacher BE01254?
    • S
      Sara MillerSep 2, 2025
      If the internal battery of your Schumacher Remote Starter won’t hold a charge, the battery may be bad and unable to accept a charge. Have the battery checked by a professional.
  • F
    Francisco LyonsSep 5, 2025
    Why does the compressor shut off on my Schumacher Remote Starter?
    • M
      Marcus AndersonSep 5, 2025
      If the compressor on your Schumacher Remote Starter shuts off, it may be overheating. Allow it to cool down for a few minutes before trying again.
  • P
    pdownsSep 7, 2025
    What to do if my Schumacher Remote Starter won’t power my 12V device?
    • D
      dsimmonsSep 7, 2025
      If your Schumacher Remote Starter isn’t powering your 12V device, first ensure that the 12V device is turned on. Check the battery charge status by pressing the Battery Status button. If the device draws more than 20A, has a short circuit, or the internal fuse has blown, the internal 20A fuse needs replacement by a qualified service person.
  • E
    Eric MillerSep 9, 2025
    Why does the compressor on my Schumacher BE01254 shut off?
    • B
      barnesgwendolynSep 9, 2025
      The compressor might be overheating. Allow it to cool for a few minutes before trying again.

Summary

Important Safety Instructions

Risk of Explosive Gases

Warns about explosive gases from lead-acid batteries and adherence to instructions.

Risk of Electric Shock or Fire

Highlights hazards related to electric shock and fire during operation.

General Safety Guidelines

Covers safe handling, usage, and placement of the jump starter.

Personal Safety Precautions

Protective Measures and First Aid

Details eye protection, clothing, and acid spill neutralization procedures.

Features Overview

Charging the Internal Battery

Operating Instructions

Jump Starting a Vehicle

Step-by-step guide on how to safely jump start a car's engine.

Maintenance Instructions

Moving and Storage Instructions

Troubleshooting

Schumacher BE01254 Specifications

General IconGeneral
BrandSchumacher
ModelBE01254
CategoryRemote Starter
LanguageEnglish

Related product manuals