SCHUNK FT - Applicable Documents; Variants; Sizes

General
1.1.2 Applicable documents
• General terms of business *
• Catalog data sheet of the purchased product *
• Commissioning instructions for the force-torque-sensor system
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
1.1.3 Variants
This operating manual applies to the following variations:
• Force-torque-sensorFT
• Force-torque-sensorFT with FTN-interface
• Force-torque-sensorFT with FTW-interface
• Force-torque-sensorFT with FTD-interface
• Force-torque-sensorFT with FTE-interface
NOTE
For information on the Force-torque-sensorFT with an FTS-
interface, contact SCHUNK.
1.1.4 Sizes
This operating manual applies to the following sizes:
• FT Nano
• FT Mini
• FT Gamma
• FT Delta
• FT Theta
• FT Omega
NOTE
For the sake of clarity, the sizes of the force-torque sensors have
been combined into two size groups in some places in this
manual:
• FT Nano and FT Mini
• FT Gamma, FT Delta, FT Theta and FT Omega
503.00 | FT | Assembly and Operating Manual | en | 389582