QM.UC.00002-R3.0 |en
11
Identification plate
The identification plate is placed on the control unit cover:
Fig. 2
Information Description
Id. No. Product code no.
Type Model
Serial No. Product serial no.
Work No. Product production no.
Voltage Rated voltage (mains)
Frequency Rated frequency (mains)
Channels Number of output channels
Phases Phases (mains)
Current Rated current (mains)
Lcm Rated short-circuit data
Year Year of manufacture
Weight Weight
The identification plate must never be removed! Please always
have the serial no. at hand when contacting SCHUNK about tech-
nical matters.
5.1
To Next Page
Loading...