Basic safety notes
6 QM.UC.00002-R3.0 |en
Product safety
Dangers arise from the control unit, if e.g.:
• the control unit is not used in accordance with its intended
purpose.
• the control unit has not been installed or maintained properly.
• the safety and installation notes have not been observed.
Avoid any manner of working that may interfere with the function
and operational safety of the control unit.
Wear protective equipment.
NOTE
contained in the relevant chapters.
Protective equipment
Provide safety devices according to the EC Machinery Directive.
Personnel qualification
Installation, first commissioning, maintenance, and repair of the
control unit may be performed by trained qualified personnel, on-
ly. Any person called upon by the operator to work on the control
unit must have read and understood the complete installation and
operating manual especially the chapter "Basic safety notes" ( 2,
Page 5). This applies particularly to personnel used only occasion-
ally, such as maintenance personnel.
2.3
2.3.1
2.4
To Next Page
Loading...
Need help?
General
