Installation
14 QM.UC.00002-R3.0 |en
Installation
PERICOLO
Danger of electric shock!
Touching live parts can cause death by electric shock.
• All the electrical connections must be carried out by an elec-
trician who has all the relevant information for the job. Al-
ways observe laws, regulations and standards applicable at
the site of installation and operation.
1 Check the packaging before accepting the control unit.
2 Open the packaging and take out the control unit.
3 Check the control unit for transport damage!
4 Compare the control unit with the specifications given in the
order!
DANGER
Danger caused by short-circuit.
Never start up the control unit if you have detected visual dam-
age!
• Notify the freight carrier or SCHUNK GmbH & Co. KG immedi-
ately if you detect damage and/or missing components! (With
all the relevant details.)
5 Compare the performance data on the identification plate of
the control unit with the data of the electricity grid on site.
6
To Next Page
Loading...
Need help?
General
