Basic safety notes
210.00 | PZN-plus | Assembly and Operating Manual | en | 389374 13
2.9 Transport
Handling during transport
Incorrect handling during transport may impair the product's
safety and cause serious injuries and considerable material
damage.
l
When handling heavy weights, use lifting equipment to lift
the product and transport it by appropriate means.
l
Secure the product against falling during transportation and
handling.
l
Stand clear of suspended loads.
2.10 Malfunctions
Behavior in case of malfunctions
l
Immediately remove the product from operation and report
the malfunction to the responsible departments/persons.
l
Order appropriately trained personnel to rectify the
malfunction.
l
Do not recommission the product until the malfunction has
been rectified.
l
Test the product after a malfunction to establish whether it
still functions properly and no increased risks have arisen.
2.11 Disposal
Handling of disposal
The incorrect handling of disposal may impair the product's
safety and cause serious injuries as well as considerable material
and environmental harm.
l
Follow local regulations on dispatching product components
for recycling or proper disposal.
2.12 Fundamental dangers
General
l
Observe safety distances.
l
Never deactivate safety devices.
l
Before commissioning the product, take appropriate
protective measures to secure the danger zone.
l
Disconnect power sources before installation, modification,
maintenance, or calibration. Ensure that no residual energy
remains in the system.
l
If the energy supply is connected, do not move any parts by
hand.
To Next Page
Loading...
Need help?
General
