Schwaiger DAB 650 - System Settings - Standby, Language, Reset; Factory Reset Procedure

43
USER GUIDE
For the other settings under Time/Date, press the / /
buttons to select
from the following options and then press the SELECT button to confirm.
Auto update Update from DAB/FM/Network/No update
Set format 12 / 24 hour format.
Set timezone Select a time zone. (Only available when Auto update
from Network is on.)
Daylight
savings
Select daylight savings. (Only available when Auto update
from Network is on.)
» The default auto time update setting is “Update from Network”. If you
would like to manually set the time, it is recommended to turn the Auto
update function off.
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play mode.
1. During System settings mode, press the
/ /
buttons to select Inactive
Standby and press SELECT button to confirm.
2. Press
/ /
buttons to select between Off, 2 hours, 4 hours, 5 hours and
6 hours. Press SELECT button to confirm.
Language
1. During System settings mode, press the / /
buttons to select Langua-
ge and then press the SELECT button to confirm.
2. Press the
/ /
buttons to change the display language of your choice.
3. Press the SELECT button to confirm.
Factory Reset
There may be times when you need to reset your unit back to the factory settings
especially when you have moved house. If you experience reception problems you
may want to reset and try again. If you move to another part of the country and
pick up the local and national DAB stations in that area, your previously tuned
channels may no longer be available.
1. During System settings mode, press the
/ /
buttons to select Factory
reset, and press the SELECT button to confirm.
2. Press the
/ buttons to select [Yes], and press the SELECT button to
confirm or select [No] to cancel.
» After the system reset, all the tuned stations, Internet, DAB & FM preset
stations will be erased.