Schwinn 490e - Page 23

23
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and wait 5 minutes before cleaning, main-
taining or repairing this machine. Place the power cord in a secure location.
Note:Yourmachinemaynotmatchtheimagesprovidedexactly.
1. Unplug the Power Cord from the wall outlet and machine.
2. FlextheedgesoftheFrontLowerShroudtodisengage
the 8 inside tabs from the Main Shrouds.
Note: It may be easier to pry up the edges of the Front
LowerShroudusingaatheadscrewdriver.To
avoid damage to the surface of the Shrouds,
we recommend putting a piece of cloth over the
screwdriver blade.
Front
Lower
Shroud
Note: Main Shrouds removed for clarity.
Sensor Hub
Cover
Note: The Shrouds have been removed from some of
the images to provide additional details.
3. FlexthesidesoftheSensorHubCovertodisengagethe
2 side tabs (indicated by ovals), and remove it.