Schwinn Trailblazer - Using the Safety Harness with One Child

3
Back of seat
Front of seat Back of seat
1
4
Back of seat
2
ADJUSTING THE SHOULDER STRAPS
23 Schwinn Trailblazer Double Seat
Figure 5.2
There are three slots on the back of the seat. These slots are
used to adjust the proper height of the shoulder straps to your
child’s height. To adjust the shoulder strap height:
❶ Starng from the back of the seat, pull the shoulder strap
anchor away form the seat.
❷ Insert the anchor through the slit in the seat, pushing it
towards the front.
❸ Insert the anchor through the slit in the front of the seat at
the desired height.
❹ Pull the strap and anchor all the way through to the back.
Make sure the strap is properly anchored on the seat
back. Repeat these steps for the opposite strap. Figure 5.2