MAPPING
(C)
Changing Channel/Group Mapping
Enter Channel/Group Programming Mode (See page
6).
When the screen flashes blue, Long Press
the
channel/group you wish
to
remap
to
another position on
the
Display Module screen.
When all buttons flash, Long Press the button you want
to
move until it flashes
to
enter Mapping
mode
.
Once you've selected a button
to
move, Tap
the
button you want
to
swap positions with.
You
may select
another channel/group
to
swap if you wish. When finished, Long Press the Conflg Button button
to
return
to
the Channel/Group Programming
Mode
and a second time
to
return
to
the main screen.
Note: Changing
the
Channel positions on the screen does NOT change the actual output channels.
I
If
you
have
any
questions
or
need
technical
assistance
with
the
installation,
or
the
most
current
application
please
call
or
visit
us
on
the
web
at:
■
(800) 363-4490
x1
I www.scosche.com/contact
©2022 SCOSCHE INDUSTRIES, INC.
10
MBR
IX
03/22
To Next Page
Loading...