C1448, C1848 D
Air and Water Cooled User Manual
December 2014
Page 9
Plumbing Requirements
All models require connection to cold, potable water.
A hand actuated valve within site of the machine is
required. Air cooled models have a single 3/8” FPT
inlet water connection.
Water cooled models have a 1/2" FPT drain tting
plus an additional 3/8” FPT condenser inlet water
connection.
Water Filters
If connecting to water ltration, lter only the water
to the reservoir, not to the condenser. Install new
cartridges if the lters were used with a prior machine.
A triple head lter is recommended. Either the
Scotsman SSM3 taste and odor lter system, or the
ADS-AP3 Aqua Patrol system.
Water Fitting
Field Supplied
Inlet Water Connection
To Next Page
Loading...
