10
ASSEMBLING THE AUTOMATIC MILK
FROTHING SYSTEM
1. Place the connection rubber into the slot
inside the lid.
3. Insert the flexible milk tube into the
rubber outside of the milk container lid.
Note: There is a protective cover on
the inlet of the milk spout, please open
it before inserting the flexible milk tube
connector.
2. Insert the tube of the milk container into the
rubber inside the lid. Please note you must
insert the straight part of the tube into the
covered connector (the slanted part will be
immersed into the milk). Put the cover back
on the milk container.
4. Insert the metal end of the flexible milk tube
into the inlet of the milk spout (open the inlet
cover first).
Protective cover
To Next Page
Loading...