8
FIRST TIME USE
Press the hot water button to clean the inner parts of the coffee machine before use.
Note: Press the hot water button any time to stop the machine from dispensing hot
water and to start coffee making.
OPERATION
PREPARING YOUR COFFEE
1. Switch on the appliance by pressing the Power ON/OFF button. .
2. The appliance is in standby condition.
3. Place a cup under the coffee spout and adjust the height of the spout to fit the cup. Depending
on the size or height of the cup, remove the drip tray or adjust the position of the drip tray as below:
4. Press the Espresso button once.
5. The button will flash after being pressed. It will then light up to indicate that the appliance is preparing
the coffee.
6. When the appliance resumes to standby condition, the coffee is ready to serve.
FILLING THE WATER TANK
When is flashing, the water level in the water tank is too low and filling it is necessary.
1. Use the integrated handle on the lid to lift the water tank.
Note: To prevent overflow of water from the water tank, do not fill water directly into the
container.
To Next Page
Loading...