22
II. EMPTY SYSTEM FUNCTION
It is recommended to use the empty system function before storing or before taking the
machine to a repair agent.
1. Switch on the appliance.
2. Press and hold the button and latte button simultaneously for 5 seconds.
3. will then be flashing.
4. Remove the water tank from the appliance. will light up stably to indicate that the
empty system is under process. The coffee spout will dispense a small amount of water.
5. After completing the empty system function, the appliance will switch off automatically.
Important: Press hot water button to clean the inner parts of the coffee machine when it is
used again.
III. MANUAL RINSING
IMPORTANT: We recommend performing a daily or weekly manual rinsing cycle to clean
the coffee nozzle after use. It is also recommended to perform a manual rinsing if the
appliance has not been used for a long period of time.
1. Switch on the appliance.
2. Press and hold the Power ON/OFF button and hot water button
simultaneously for 5 seconds.
3. The hot water button , Espresso button and Lungo button will go off.
The coffee spout will dispense a small amount of water.
Danger: Hot water will be dispensed from the spout into the external drip tray. Be careful to avoid
scalding yourself.
4. After rinsing, the appliance will resume to standby condition.
CLEANING THE APPLIANCE
Timely cleaning and maintenance of the appliance is very important to prolong the life of the
appliance. It is important to thoroughly clean the milk accessories daily.
IMPORTANT
Non-compliance with cleaning instructions or a lack of maintenance of the machine will
terminate the manufacturer's warranty. Repairing the machine will be the subject to a repair
quote.
To Next Page
Loading...