21
CLEANING & MAINTENANCE
DESCALING
I.
When is flashing, it indicates that the appliance needs to undergo descaling. The appliance
will remain in the best condition if this function is performed at least once a month or more
regularly depending on the hardness of water used. Follow the procedures below:
Note: The complete descaling process will take approximately 30 minutes. Do not switch off the
appliance or unplug during the process.
1. Fill the water tank to “MAX” level.
2. Add one pack of cleaning agent into the water tank.
Important: Do not use vinegar or other cleaning agents to do descaling for this appliance. It
can damage the appliance.
3. Plug in the appliance.
4. Place a large container with at least 1.5L capacity under the coffee spout.
5. Switch on the appliance.
6. Press and hold and Espresso button for 5 seconds.
A beep sound will be heard and and will be flashing.
7. Press to confirm undergoing the descaling process.
8. will be flashing which indicates that the appliance is undergoing descaling process.
Note: A small amount of water will periodically dispense automatically during the descaling
process.
Caution: Hot water can burn or scald. Do stay away.
Do not let the machine return to standby in step 8, as the process will be aborted in this case.
9. When all water in the water tank is dispensed out, and Espresso
button will be flashing. Remove all the remaining cleaning agent in the water tank,
fill the tank with tap water to the “MAX” level. When water is filled, will stop
flashing. The appliance will continue the descaling process.
10. When the descaling process is complete, the appliance will switch off automatically.
To Next Page
Loading...