14
HOT WATER
Hot water can be dispensed by pressing the hot water button . The hot water button will light up
and the appliance will start preparing the hot water. When the light turns off, the water is ready to
serve. The hot water will come out of the steam nozzle.
Warning: Do not use the hot water function continuously for more than a water tank’s water
capacity.
Note:
Hold down the hot water button for 3 seconds to access the different temperature choices. Scroll
through the possible choices by pressing the key successively (3 different set temperatures: 65 °C,
75°C and ‘high temperature’. Release the button and wait 3 seconds, the desired temperature is
selected when the temperature indicator no longer flashes.
Press the button once to dispense hot water at the desired temperature.
Press the button a second time to stop dispensing hot water.
DAILY CLEANING OF THE APPLIANCE
Timely cleaning and maintenance of the appliance is very important to prolong the life of the
appliance.
IMPORTANT
Manually rinsing the machine is absolutely essential AT LEAST ONCE PER WEEK.
Please see instructions on page 26 of this instruction manual.
1. Disconnect the power cord from the mains supply outlet.
2. Pour away all water in the internal and external drip tray.
3. Use a damp cloth or non-scratching cleaner to clean the water stains on the appliance.
Important: Never use any abrasive, vinegar or descaling agents not included in the box to
clean the appliance.
After using the appliance for a long period of time, coffee grounds may stick to the wall of
grounds outlet. It is recommended to clean the outlet by following the steps below to ensure
that coffee grounds can be delivering to the brewer.
To Next Page
Loading...