EasyManua.ls Logo

SCS Sentinel prim' OneGate 3 - G- TROUBLESHOOTING

SCS Sentinel prim' OneGate 3
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36 EN
Problem Solutions
The gate doesn’t move when
pressing the button of the
transmitter
1. Check if the power is higher than 12v
2. Ensure you all the wirings are well connected on the terminal block
3. Ensure you the good condition of the fuse or circuit breaker of your
supply
The gate opens but doesn’t close Check if the LED1 indication is turned on in which case check the
photocells, their connections and their alignings. Put the program H-0
for the photocells to be inactive during the check of your connections.
The gate doesn’t open entirely Increase the power with the program 7 (setting from 7-1 to 7-6). Update
the phases of slowdown with the program 6 (settings from 6-1 to 6-4).
However on windy day, stops can be contasted since the automation
kit is subjected to anti-pinch and crushing safety norms (but it’s not a
defect of the device)
The photocells don’t work Check the photocells are activated with the H : H1 program. Check the
red LED of the RX photocell is not turned. If it is the case, there is a
aligning defect of your photocells.
The remote control don’t have a
good sensing range
Check your batteries power. Check the antenna connection and that the
single wire doesn’t touch the braid.
H- WARRANTYH- WARRANTY
G- TROUBLESHOOTINGG- TROUBLESHOOTING
Are never covered by our warranty:
• Damage resulting from the consequences of a bad installation (bad wiring, reverse polarity ...).
• Damage resulting from improper use of the device (use in contradiction with the manual) or its modification.
• Damage resulting from the consequences of the use of components not from SCS SENTINEL.
• Damage due to lack of maintenance, physical shock.
• Damage due to weather: hail, lightning, strong wind etc..
• Returns made without a copy of the invoice or receipt.
SCS Sentinel grants to this product a warranty period, beyond
the legal time, as a sign of quality and reliability.
The invoice will be required as proof of purchase date. Please
keep it during the warranty period.
Carefully keep the barcode and the proof of purchase, that will
be necessary to claim warranty.
Warranty 3 years
I- WARNINGSI- WARNINGS
Don’t throw batteries or out of order products with the household waste (garbage). The dangerous substances that
they are likely to include may harm health or the environment. Make your retailer take back these products or use the
selective collect of garbage proposed by your city.

Table of Contents

Related product manuals