Scuba Force SF2 ECCR - Page 31

Manual Version 19 / 01-2019 II Page 31 of 44
SF2 ECCR OPERATION MANUAL
To simplify assembly, the wing is attached to the carrier with wing nuts. Then the
hoses and the pressure gauges are fed forward through the upper slots of the
wing.
Now the backplate with harness can be mounted on the wing. The hoses are
carefully guided through the "bungees" on the harness and reconnected to the
manual add. Care must be taken to ensure that each hose is connected to the
right place, otherwise malfunctions will occur.