Need help?Do you have a question about the Scytek electronic ASTRA 777 and is the answer not in the manual?
Lists components included in the security system package.
Details optional features and accessories that can expand system functionality.
Explains the functions and button layouts of the 2-way LCD remote.
Step-by-step guide for programming new or replacement 2-way LCD transmitters.
Instructions on how to replace the battery in the 2-way LCD transmitter.
Procedures for setting the clock and alarm functions on the LCD remote.
How to activate the LCD backlight and check the system's current status.
Details on programming features like siren confirmation, sound tones, and passive arming.
How to activate and deactivate the system's Valet Mode for service.
Describes the operation and programming of one-way remote transmitters.
Instructions for operating multiple vehicles with a single remote transmitter.
Steps to arm the vehicle security system remotely using the transmitter.
Steps to disarm the vehicle security system remotely using the transmitter.
Explains how the system indicates triggered zones via LED flashes after disarming.
How to temporarily silence arm/disarm chirp indications.
Describes the automatic arming feature activated by turning off the ignition.
How to activate the alarm remotely in an emergency situation.
Procedure to disarm the system if the transmitter is lost or inoperable.
Details on using a programmed code for emergency system disarming.
Explains the feature that automatically re-arms the system after disarming.
Instructions for activating and deactivating Valet Mode.
How to page the transmitter if it is misplaced.
How door locks operate automatically with the vehicle's ignition.
How the dome light activates when the system is disarmed.
Explains the use of auxiliary outputs for additional features like trunk release.
How to temporarily bypass sensor inputs to prevent false alarms.
Describes the system's anti-carjacking modes for personal security.
General steps and review of system components before installation.
Guidance on where to mount the control unit, siren, and shock sensor.
Detailed description of connections for the main 14-pin harness.
Explanation of connections for LED, valet switch, and shock sensor connectors.
How to configure jumpers for parking light output polarity.
Steps to access the system's programming menu.
How to restore all programmable options to factory default settings.
Detailed list and description of system features that can be programmed.
Wiring diagrams for basic door lock system connections.
Diagrams for connecting two-stage door lock operation.
General| System Type | Car Alarm |
|---|---|
| Remote Start | Yes |
| Two-Way Communication | Yes |
| GPS Tracking | No |
| Panic Mode | Yes |
| Keyless Entry | Yes |
| Disarming Mode | Remote |
| Remote Paging | Yes |
| LCD Display | Yes |
| Ignition Kill | Yes |
| Door Lock Control | Yes |
| Trunk Release | Yes |
| Valet Mode | Yes |
| Battery Backup | No |
| Shock Sensor | Yes |
| Remote Control | Yes |
To Next Page