SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
13
Understanding Your New System
1) Strip Stand-by Display
After turning on the meter, the below will be
displayed automatically to show the test strip
icon ashing. In this Strip Stand-by Display,
it’s able to enter setting mode of the meter or
search the test results.
2) Blood Stand-by Display
If a test strip is inserted into the meter in either
Strip Stand-by Display or turning o, the below
will be displayed automatically to show the
appropriate test result after applying blood
sample. And if you pull o the test strip, it will
return to Strip Stand-by Display. In this Blood
Stand-by Display, the ON/OFF button doesn’t
act. But if you need to check the meter or the
test strip, you may use a control solution. Then
the control solution icon in the left-side of test
strip icon will be displayed by pressing left
button during 3 seconds.
To Next Page
Loading...