SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
60
Maintenance and Troubleshooting
CHAPTER 5 :
Maintenance and Troubleshooting
1. Performing the Check Strip Test
When you use a SD check Strip for checking
your meter?
• When you want to easily check the
performance of the meter.
• Before using your meter for the rst time.
• Whenever your result does not agree with
the level you feel
• If you have repeated a test and the blood
glucose result is still lower or higher than
expected.
How to Use the SD Glucose Check strip
1. Insert a Check Strip (facing up ‘check strip’
printed in arming knob) into test strip
slot. The meter turns on automatically.
2. If the Check Strip is inserted properly, the
meter will start the check.
• The Check Strip test does not
replace the Control Solution test.
CAUTION
To Next Page
Loading...