SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
54
Using the Meter Memory
CHAPTER 4 :
Using the Meter Memory
The meter automatically stores about 500
glucose results, letting your review them in
order from the most recent to the oldest. If
you have set the time/ date feature, the time
and date of the results are also displayed. If the
memory is full and a new result is added, the
meter deletes the oldest result.
The meter also calculates three kinds of 7, 14
and 30-day averages of test results stored in
memory, 1)normal, 2)pre-meal and 3)post-
meal state averages. You do not need to set the
time and date for the meter to give you average
calculations. HI/Lo result (results outside of the
meter’s reading range) and results with control
solution symbol are not included in averages.
To Next Page
Loading...