SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
27
Understanding Your New System
If you select the alarm o feature in
rst (also second, third and fourth)
alarm mode, next will appear the Strip
Stand-by Display.
NOTE
[ Left or right
button ]
[ ON/OFF
button ]
• If you select the alarm o feature,
next will appear the Strip Stand-
by Display.
• If you select the alarm on feature,
you can set the alarm up to four
times a day at any time you want.
NOTE
3. If you select the alarm on feature in rst
alarm mode, the clock will blink. Set the
correct time and minute you want to set an
alarm on the display by pressing either the
left or the right button and then select the
preferred feature by pressing the ON/OFF
button.
To Next Page
Loading...