10. Specifications
Model DIESEL 6000 E
Maximum output / Rated output 5200 W / 4160 W
Acoustic pressure at 1 m 95 dB(A)
Engine type Kohler KD440
Recommended fuel and fuel tank capacity Diesel oil 5 L
Recommended oil and oil sump capacity SAE 5W40 1.5 L
Oil failure cut-out ●
Circuit breaker ●
Direct Current X
Alternating Current 230V – 18.1A
Socket types 2P+T 230V 10/16A 2P+T 230V 32A
Spark plug type X
Battery ●
Dimensions L x l x h 81 x 55.5 x 59 cm
Weight (without fuel) 100 kg
● : Standard ○ : Option X : Not applicable
11. Cable sizes
Laying mode = cables on cable tray or racks not perforated / admissible voltage drop = 5% / Multiconductors.
Cable type PVC 70°C (example H07RNF) / Ambient temperature =30°C.
Rated Current (A)
Cable lengths
0 to 50m 51 to 100m 101 to 150m
mm² / AWG mm² / AWG mm² / AWG
Single-phase Three-phase Single-phase Three-phase Single-phase Three-phase
10 4 / 10 1.5 / 14 10 / 7 2.5 / 12 10 / 7 4 / 10
16 6 / 9 2.5 / 12 10 / 7 4 / 10 16 / 5 6 / 9
20 10 / 7 2.5 / 12 16 / 5 4 / 10 25 / 3 6 / 9
25 10 / 7 4 / 10 16 / 5 6 / 9 25 / 3 10 / 7
32 10 / 7
25 / 3
35 / 2
40 16 / 5 35 / 2 50 / 0
50 16 / 5 35 / 2 50 / 0
63 25 / 3 50 / 0 70 / 2 / 0
12. EC Declaration of conformity
Name and address of manufacturer: SDMO, 12 bis rue de la Villeneuve, CS 92848, 29228 BREST CEDEX 2, FRANCE
Description of the equipment Generating set
Make SDMO
Type Diesel 6000 E
Name and address of the person authorised to create and keep the technical file
G. Le Gall, SDMO, 12 bis rue de la Villeneuve, CS 92848, 29228 BREST CEDEX 2, FRANCE
G. Le Gall, the manufacturer's authorised representative, hereby declares that the equipment, if installed inside soundproofed
premises(*), complies with the following EU Directives:
2006/42/EC / Machinery Directive.
2006/95/EC / Low Voltage Directive.
2004/108/EC / Directive on Electromagnetic Compatibility.
01/2010 - G. Le Gall
(*) In this instance, Directive 2000/14/EC dated 08/05/2000 relating to noise
emission in the environment by equipment for use outdoors is not applicable. This
equipment must be installed in compliance with safety regulations by an approved
professional (consult us).
To Next Page
Loading...
