HotFind-D Infrared Camera Operation Manual
17
4.3.5 “Analysis parameter”
Select this and press menu(enter) key that there will be a box
comes out as below Use the direction keys to change the parameters in
order to assure the accuracy of the camera.
4.3.6 “Image only”
Select this and press menu(enter) key then the screen will
display the infrared image only, all the information will be concealed.
4.3.7 “Setup”
Select this and press menu(enter) key that it will pop up the
submenu.
1. Analysis setting
Select this and press menu(enter) key that there will be a box
To Next Page