HotFind-D Infrared Camera Operation Manual
28
In other statuses, if it is required to save the current analysis status
and adjust, press the key “A”. Now “Null” is displayed on the status bar.
Then press the key “A” again or manually adjust the image. If it is
required to adjust the image without saving the current analysis status,
press the key “C”. Now the current analysis status is cleared and “Null” is
displayed on the status bar. Press the key “A” again or manually adjust
the image.
5.4.3 Freeze and Live of the image (applicable to any status)
In the live image status, press the key “S”, the image will be frozen.
On the contrary, press the key “S” in the Image Freeze status, the image
will be lived again. This operation is available in all the status.
5.5 Realization of all functions
5.5.1 Menu Calling
（1） In the non-“menu” status, press the menu(enter) key and the
menu will be poped up.
（2） Pull down the menu and move up and down as well as left and
right with four Direction keys.
（3）Select one item under the menu，press the “menu(enter)” key to
enter this item and press the key “C” to exit the selected mode.
（4） In Menu mode, press the key “C” to return to the previous menu,
To Next Page