Website: www.seada.co.uk 1/23 E-mail: sales@seada.co.uk
1. Introduction
1.1 Introduction to SDCP6
The Wallplate Control Panel has (3) built-in programmable RS232 connectors and (2) Infrared (IR)
connectors.
The Programmable Control Panel can fully control the compatible switches, as well as third-party
devices such as matrix switcher, compact scaler switcher, projectors, screens, etc. Use the device
for presentations in showrooms, classrooms, and boardrooms.
1.2 Features
☆ Each button can be programmed to send bi-directional RS232 commands simultaneously to
control third party devices.
☆ Each button can be programmed to send the infrared codes simultaneously to control the
third-party devices and support infrared code learning function.
☆ The unit may be programmed through the ETHERNET port, via the Control Software.
☆ Crystal and backlit buttons with easy user-friendly customizable changeable labels.
☆ The backlit brightness is controllable.
☆ Dimension: 70mm long and 41mm wide.
1.3 Package List
① 1x SDCP6
② 1x Button label
③ 3x 2-pin pluggable terminal blocks
④ 1x 5-pin pluggable terminal block
⑤ 1x Power adapter (12VDC 1A)
⑥ 6x Button caps
⑦ 1x 3-pin pluggable terminal block
⑧ 1x User Manual
To Next Page
Loading...